Free Download 26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 23, Issue 4 By
2002 | 863 Pages | ISBN: 0470294752 | PDF | 21 MB
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 Water?Based Tape Casting with Latex Binders (pages 3-14): Elis Carlstrom and Annika KristofferssonChapter 2 Radio Frequency Drying of Ceramics (pages 15-22): Ben WilsonChapter 3 Laser CVD System Design, Operation, and Modeling (pages 23-33): W. Jack Lackey, David Rosen, Chad Duty, Daniel Jean, Scott Bondi, Tarek Elkhatib, Ryan Johnson, Mingxuan Jiang, Jian Mi, Josh Gillespie and Racheal HarveyChapter 4 Near Net Shapes by Ceramic Injection Molding (pages 35-42): Animesh Bose and Tai Shing WeiChapter 5 Fabrication of Ceramic Components for Micro Gas Turbine Engines (pages 43-50): H.?C. Liu, S. Kang, F. B. Prinz, J. Stampfl and Tu WienChapter 6 Low Pressure Injection Molding Process for Near-Net Shape, Hot Gas Filter Components (pages 51-59): Rama Nageswaran and F. A. BruceChapter 7 Near Net-Shape Si02-TiO2-Glass Compacts with Reduced Thermal Expansion (pages 61-65): Rolf Clasen, Aline Licht, Markus Hornfeck, Monika Oswald, Klaus Deller, Helmut Mangold and Gerrit SchneiderChapter 8 An Approach to Examination of Thermal Decomposition by Novel Evolved Gas Analysis (pages 67-72): Takahisa Tsugoshi, Takaaki Nagaoka, Masaki Yasuoka and Koji WatariChapter 9 Cost-Effective Synthesis of Silica Aerogels from Waterglass/Teos by Ambient Drying and Their Applications (pages 73-78): Gun S. Kim, Sang H. Hyun, Sung W. Hwang and Gye T. KimChapter 10 Piezoresistive Ceramic Composites for Force or Pressure Sensor (pages 79-84): Hiroaki Makino, Shin Tajima, Mitsuru Asai and Nobuo KamiyaChapter 11 The Electrical Properties of CaZrO3 Humidity Sensor (pages 85-90): Jae?Ho Yuk, Byung?Soo Lee, Do?Hyun You and Hyeong?Gweon KimChapter 12 Effect of Organic Components of Low Friction/Flexible Material (pages 91-101): Y. Shibata, T. Sakai, S. Satake, S. Katayama and N. YamadaChapter 13 Ceramic Light Metal Composites - Product Development and Industrial Application (pages 103-113): Michael Buchmann, Rainer Gadow, Daniel Lopez and Dietmar SchererChapter 14 CMC Brake Disks in Serial Production - The Competition Between Cost Effectiveness and Technical Performance (pages 115-123): R. Gadow and M. SpeicherChapter 15 Ceramic on Glass and Glass-Ceramic Layer Composites for Industrial Applications (pages 125-138): R. Gadow, A. Killinger and C. LiChapter 16 The Commercialization of Advanced Telecommunications Technologies in Georgia Through Yamacraw (pages 139-146): Elizabeth A. JudsonChapter 17 Fabrication of Ceramics with Designed Porosity (pages 149-160): R. W. RiceChapter 18 Effect of Microstructure on the Mechanical Properties of Dense/Porous Multilayered Silicon Nitride (pages 161-166): Masato Ishizaki, Masateru Nishi, Asuhiro Shigegaki and Tadashi SasaChapter 19 Comparison Among the Functional Forms Describing Changes in Thermal and Mechanical Properties Due to Microcracking and Porosity (pages 167-174): E. D. CaseChapter 20 Manufacturing of Porous Oxide Ceramics from Bioorganic Preforms (pages 175-181): H. Sieber, J. Cao, C. R. Rambo and P. GreilChapter 21 Grain Boundary Strengthening of Porous Alumina Ceramics: Effect of Secondary Inclusions and Dopants (pages 183-190): D. Doni Jayaseelan, N. Kondo, M. E. Brito and T. OhjiChapter 22 Hermetic Glass Bodies with Controlled Porosity: Processing and Properties (pages 191-202): Aldo R. Boccaccini, Jose L. Spino and Valeria CannilloChapter 23 Self-Foamed Cellular Ceramics from Silicone Resins with a Zeolite Surface (pages 203-210): M. Scheffler, T. Gambaryan?Roisman, J. Zeschky, F. Scheffler and P. GreilChapter 24 Wood Derived Porous and Cellular Ceramics (pages 211-218): Evelina Vogli, Heino Sieber and Peter GreilChapter 25 Porous Sic Ceramics with Oriented Structure from Natural Materials (pages 219-226): U. Vogt, A. Herzog and R. KlingnerChapter 26 Design of Screen-Printed Porous Layers for Improving Gas Sensor Performances (pages 227-234): Jean?Marc Tulliani, Elena Billi, Laura Montanaro and Gilbert FantozziChapter 27 Designing and Fabricating Pores in Porous Materials (pages 235-245): Elis Carlstrom, Cathrine Engebretsen and Erik AdolfssonChapter 28 Effects of Porosity on Thermal Shock Resistance of Silicon Nitride Ceramics (pages 247-252): J. H. She, Y Beppu, J. F. Yang, D. D. Jayaseelan and T. OhjiChapter 29 Binder Induced Porosity in Tape Casting (pages 253-259): Cathrine Engebretsen and Elis CarlstromChapter 30 Potential of the Acousto-Ultrasound Method to Characterize the Strength of Hot Gas Filter Materials (pages 261-267): P. Pastila, A.?P. Nikkila, T. Mantyla, W. Ellingson, E. R. Koehl and D. SandbergChapter 31 Effect of Combustion Conditions on Properties of Ceramic Hot Gas Filters (pages 269-276): Ralf Westerheide, Jens Angermann, Bernd Meyer, Petra Rehak and Jorg AdlerChapter 32 Determination of Pore Volume and Pore Distribution by Liquid Extrusion Porosimetry Without Using Mercury (pages 277-284): Akshaya Jena and Krishna GuptaChapter 33 Ellular Oxide Ceramics from Filler Loaded Silicone Resins (pages 285-290): J. Zeschky, M. Scheffler, P. Colombo and P. GreilChapter 34 Unique Applications of Diamond and Diamond?Like Carbon for Use as Tools or Components (pages 293-304): Masao Murakawa, Hiroyuki Noguchi and Sadao TakeuchiChapter 35 Ceramic Tribo-Coatings in Japan -A Report on Sate?of?the Art Materials (pages 305-316): J. Akedo, Y. Hibi, K. Mori, K. Umeda, Y. Enomoto, Aist Chubu and S. MoriChapter 36 Characterization of Aluminum Phosphate Sealed Alumina and Chromia Coatings (pages 317-324): Minnamari S. Vippola, Petri Vuoristo, Tapio A. Mantyla and Toivo LepistoChapter 37 Reaction Bonding of Oxide Coatings on Silicon Nitride (pages 325-329): Masahiro Asayama, Motohide Ando and Tatsuki OhjiChapter 38 Microstructural Evolution of EB-PVD TBC'S on Cylinderical Surfaces (pages 333-340): J. Bernier, Md. Maniruzzaman, M. Fontecchio, R. D. Sisson and S. BoseChapter 39 Impact of Thermal Exposure of EB-PVD TBCs on Youngs Modulus and Sintering (pages 341-352): K. Fritscher, F. Sziics, U. Schulz, B. Saruhan, M. Peters and W. A. KaysserChapter 40 Influence of Deposition Conditions on Density and Microstructure of EB-PVD TBCs (pages 353-360): Uwe Schulz, Jan Miinzer and Uwe KaclenChapter 41 Deposition Rates of EB-PVD TBCS on Cylindrical Surfaces (pages 361-369): J. S. Bemier, W. C. S. Weir, M. Fontecchio, R. D. Sisson and S. BoseChapter 42 Quasistatic vs. Dynamic Modulus Measurements of Plasma-Sprayed Thermal Barrier Coatings (pages 371-378): J. I. Eldridge, G. N. Morscher and S. R. ChoiChapter 43 Numerical Investigation of Crack Propagation Behavior in TBC Systems (pages 381-389): Kais Sfar, Jarir Aktaa and Dietrich MunzChapter 44 Measurements of Stress Distribution in top Coat and TGO Layers Processed by EB-PVD (pages 391-396): Toru Tomimatsu, Shijie Zhu and Yutaka KagawaChapter 45 Thermomechanical Behavior of Plasma Sprayed Thermal Barrier Coatings (pages 397-408): Rolf W. SteinbrechChapter 46 Residual Stresses in Thermal Barrier Coatings for a Cu-8Cr-4Nb Substrate System (pages 409-416): Louis J. Ghosn and Sai V. RajChapter 47 Infrared Radiative Properties of Yttria-Stabilized Zirconia Thermal Barrier Coatings (pages 417-430): J. I. Eldridge, C. M. Spuckler, K. W. Street and J. R. MarkhamChapter 48 Radiation Effects in a Semitransparent Gray Coating Heated by Convection and Cooled by Radiation (pages 431-438): Charles M. SpucklerChapter 49 Application of Microwave Self-Heating Technique to the Detection of Microfracture in Thermal Barrier Coating System (pages 439-445): Mitomi Miyata, Shijie Zhu and Yutaka KagawaChapter 50 Microstructure and Performance of New Metal Glass Composite TBC (pages 449-456): Markus Dietrich, Vadim Verlotski, Robert Va?en and Detlev StoverChapter 51 Thermal Conductivity and Sintering Behavior of Advanced Thermal Barrdxr Coatings (pages 457-468): Dongming Zhu and Robert A. MillerChapter 52 Characterization of Spontaneously Formed Cerium-Based Conversion Coatings on Aluminum (pages 469-476): W. G. Fahrenholtz, Haifeng Zhou and M. J. O'KeefeChapter 53 Oxidation Barrier Multilayer Coatings for Carbon-Carbon Composites (pages 477-484): F. Smeacetto, M. Ferraris and M. SalvoChapter 54 Scale Adhesion, Sulfur Content, and TBC Failure on Single Crystal Superalloys (pages 485-495): James L. SmialekChapter 55 Effects of a then CVD-Si Layer on the Oxidation Behavior of Si3N4 (pages 497-504): Lrina V. Tsarenko, Henry Du, Woo Young Lee and John HolowczakChapter 56 Sintering and Cyclic Failure Mechanisms of Thermal and Environmental Barrier Coating Systems Under Thermal Gradient Test Conditions (pages 505-516): Dongming Zhu, Kang N. Lee and Robert A. MillerChapter 57 Mechanical Properties of an Environmental Barrier Coating on a Monolithic SiC Substrate and Its Role on Substrate Failure Behavior (pages 517-524): Shanti V. Nair, Harry E. Eaton, Ellen Y. Sun and Greg C. OjardChapter 58 Development of Novel Oxide Materials for TBC's (pages 525-532): Ulrich Bast and Eckart SchumannChapter 59 Furnace Cyclic Behavior of Plasma-Sprayed Zirconia-Yttria and Multi-Component Rare Earth Oxide Doped Thermal Barrier Coatings (pages 533-545): Dongming Zhu, James A. Nesbitt, Terry R Mccue, Charles A. Barrett and Robert A. MillerChapter 60 Oxidation- and Creep-Enhanced Fatigue of Haynes 188 Alloy-Oxide Scale System Under Simulated Pulse Detonation Engine Conditions (pages 547-553): Dongming Zhu, Dennis S. Fox and Robert A. MillerChapter 61 Single?Step Preparation of Nanosized Ceramics and Composites from Metal-Organic Precursors (pages 557-568): Sanjay Mathur, Michael Veith, Hao Shen and Stefan HufnerChapter 62 Preparation and Characterization of Nanocrystalline Nasicon Powders and Thin Films (pages 569-575): S. V. Kesapragada, S. Bhaduri, S. B. Bhaduri, E. G. Baburaj and P. A. LessingChapter 63 Manufacturing of Glass and Ceramic Matrix Composites by Electro-Phoretic Impregnation with Nanosized Powders (pages 577-584): Jan Tabellion, Christian Oetzel and Rolf ClascnChapter 64 Comparative Investigation of A12O3- and ZrO2 Nanopowders Synthesized by Different Methods (pages 585-592): Stephan Appel, Rolf Clasen, Andrei Chkourankov, Harald Natter, Rolf Hempelmann, Sabine Schlabach, Bin Xu and Dieter VollathChapter 65 Characterization of Doped Glasses Manufactured by Sintering of Nanoparticles (pages 593-600): Karsten Smeets and Rolf ClasenChapter 66 Preparation of Plzt Powders from Nano Sized Oxides (pages 601-607): Erik Bartscherer, Kathy Sahner and Rolf ClasenChapter 67 Sintering Behavior and Grain Structure Development of ZrO2- and Al2O3-Compacts Fabricated from Different Nanosized Powders (pages 609-616): Stephan Appel, Rolf Clasen, Sabine Schlabach and Bin Xu AndChapter 68 Advanced Ceramic or Glass Components and Composites by Electro-Phoretic Deposition/Impregnation Using Nanosized Particles (pages 617-627): Jan Tabellion and Rolf ClasenChapter 69 Investigation of Pore Structure of Glass Compacts by Means of Mercury Porosimetry (pages 629-636): Karsten Smeets, Jan Tabellion and Rolf ClasenChapter 70 Physical and Mechanical Properties of Microwave Sintered Nano-Crystalline Hydroxyapatite (pages 637-644): M. G. Kutty, J. P. Olberding, S. Bhaduri, J. R. Jokisaari and S. B. BhaduriChapter 71 Properties and Microstructure of Alumina-Niobium and Alumina-Neodymium Titanate Nanocomposites Made by Novel Processing Methods (pages 645-651): Joshua D. Kuntz, Guo?Dong Zhan, Julin Wan and Amiya K. MukherjeeChapter 72 A Novel Hybrid Route to Chemically-Tailored, Three-Dimensional Oxide Nanostructures: The Basic (Bioclastic and Shape-Preserving Inorganic Conversion) Process (pages 653-664): Ken H. Sandhage, Matthew B. Dickerson, Philip M. Huseman, Frank M. Zalar, Mark C. Carroll, Michelle R. Rondon and Eryn C. SandhageChapter 73 Silicon Nitride/Silicon Carbide Nanocomposites from Polymer Precursor (pages 665-672): Julin Wan, Matthew J. Gasch and Amiya K. MukherjeeChapter 74 Properties of Si3N4 - MOSi2 Composites with a Nanostructured Matrix (pages 673-679): D. Sciti, S. Guicciardi and A. BellosiChapter 75 Precursor Selection for Property Optimization in Biomorphic SiC Ceramics (pages 681-687): F. M. Varela?Feria, M. J. Lopez?robledo, J. Martinez?Fernandez, A. R. De Arellano?Lopez and M. SinghChapter 76 New Synthetic Route of Perovskite Materials in the Test Tube (pages 689-694): K. Toda, K. Uematsu, N. Ohtake, S. Tokuoka and M. SatoChapter 77 Passivation of CdTe Nanoparticles by Silane Coupling Agent Assisted Silica Encapsulation (pages 695-700): M. Nayak, M. Ando and N. MuraseChapter 78 Solution-Based Processing of Nanocrystalline SiC (pages 701-709): Chang?An Wang, Michael D. Sacks, Greg A. Staab and Zhe ChengChapter 79 Solution-Based Processing of Nanocrystalline ZrC (pages 711-717): Zeshan Hu, Michael D. Sacks, Greg A. Staab, Chang?An Wang and Anubhav JainChapter 80 Environment Conscious, Biomorphic Ceramics from Pine and Jelutong Wood Precursors (pages 719-726): M. Singh and Bo?Moon YeeChapter 81 Processing of Bioactive Ceramics with Defined Porosity (pages 729-734): Charles M. Lofton, Wolfgang Sigmund and Huiyan HuangChapter 82 Electrovector Ceramics for Biomedical Use: Manipulation of Bone-Like Crystal Growth in SBF (pages 735-744): Kimihiro Yamashita, Satoshi Nakamura and Takayuki KobayashiChapter 83 Development of Hydroxyapatite Coating on Porous Titanium Via Electro-Deposition Technique (pages 745-752): M. G. Kutty, W. A. Prisbery, S. Bhaduri, J. R. Jokisaari and S. B. BhaduriChapter 84 TEM-EDX Study of Process of Apatite Formation on Bioactive Ti-6A1-4V Alloy in Simulated Body Fluid (pages 753-760): Hiroaki Takadama, Mineo Mizuno, Hyun?Min Kim, Tadashi Kokubo and Takashi NakamuraChapter 85 Bioactive Surface Functionalization: Concept and Applications (pages 761-771): Hyun?Min KimChapter 86 Affects of Alumina and Titania Nanoparticulates on Bone Cell Function (pages 773-780): Luke G. Gutwein and Thomas J. WebsterChapter 87 Bioactivity Testing of Ceramic Materials Applied for Implants (pages 781-788): M. Yanagisawa, Y?L Zhang, M. Mizuno, U. Inoue, T. Uchida, H?M. Kim and T. KokuboChapter 88 Calcite Formation in a Revised Simulated Body Fluid (pages 789-795): Yunlong Zhang, Hiroaki Takadama, Mineo Mizuno, Masaaki Yanagisawa and Tadashi KokuboChapter 89 Apatite Deposition on Organic-Inorganic Hybrids Prepared from Hydroxyethylmethacrylate by Modification with Alkoxysilane and Calcium Salt in Body Environment (pages 797-804): Toshiki Miyazaki, Chikara Ohtsuki and Masao TaniharaChapter 90 A Composites Approach to Tissue Engineering (pages 805-816): Aldo R. Boccaccini, Judith A. Roelher, Larry L. Hench, Veronique Maquet and Robert JeromeChapter 91 Increased Osteoblast Function on Nanofibered Alumina (pages 817-824): Thomas J. Webster, Luke G. Gutwein and Frederick TepperChapter 92 Hardness and Dimensional Stability of a Bioceramic Dental Filling Material Based on Calcium Aluminate Cement (pages 825-832): Lars Kraft and Leif HermanssonChapter 93 3D CT Analyses of Porous Structures of Apatite Ceramics and in?Vivo Bone Formation (pages 833-838): Y. Lkeda, Y. Mizuta, M. Mizuno, K. Ohsawa, M. Neo and T. NakamuraChapter 94 Bioactive Glass-Ceramics Materials for Bone Substitutes (pages 839-844): C. Vitale Brovarone, F. Smeacetto and E. VerneChapter 95 Fatigue Property of Zirconia for Hip Joint Prostheses (pages 845-850): Y. Takigawa, Y. Yasutomi, M. Mizuno and K. ShirakiharaChapter 96 Mechanical and Piezoelectric Properties of Laminated Object Manufactured Ceramics (pages 853-860): Barry A. Bender, Chulho Kim, Dave Lewis, Roy J. Rayne and Carl C. M. WuChapter 97 Search for New Vacuum-UV Phosphors (pages 861-868): K. Toda, K. Uematsu, Y. Imanari, T. Nonogawa and M. SatoChapter 98 Sintering of Zirconium Tungstate (pages 869-876): L. J. Vandeperre and W. J. CleggChapter 99 Low-Temperature Anodic Bonding Facilitated by Lithium-Exchanged Sodium Borosilicate Glass (pages 877-884): Chad S. Watson, Deidre A. Hirschfeld and W. Kent Schubert
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
